I am playing audio from the computer but hear nothing from the Analog outputs

Check the following elements.

• Insure that the Cable connected to the appropriate analog output port is the Lynx CBL-AOUT85 or adheres to the Tascam DA-88 Analog I/O pin configuration.
• Make sure that the cable connected to your monitoring equipment is plugged into ANALOG OUT 1-8
• Make sure that in the Aurora⁽ⁿ⁾ display Function > Routing has the correct source set for TO ANALOG OUT.
• Verify that your monitoring equipment is turned on and the levels are turned up to a safe listening level.